Part-3
In the U.S., Canada, Australia and Europe, a portion of the 2.4 GHz Wi-Fi radio spectrum is also allocated to amateur radio users. In the U.S., FCC Part 15 rules govern non-licensed operators (i.e. most Wi-Fi equipment users). Under Part 15 rules, non-licensed users must "accept" (i.e. endure) interference from licensed users and not cause harmful interference to licensed users. Amateur radio operators are licensed users, and retain what the FCC terms "primary status" on the band, under a distinct set of rules (Part 97). Under Part 97, licensed amateur operators may construct their own equipment, use very high-gain antennas, and boost output power to 100 watts on frequencies covered by Wi-Fi channels 2-6. However, Part 97 rules mandate using only the minimum power necessary for communications, forbid obscuring the data, and require station identification every 10 minutes. Therefore, output power control is required to meet regulations, and the transmission of any encrypted data (for example https) is questionable.
In practice, microwave power amplifiers are expensive. On the other hand, the short wavelength at 2.4 GHz allows for simple construction of very high gain directional antennas. Although Part 15 rules forbid any modification of commercially constructed systems, amateur radio operators may modify commercial systems for optimized construction of long links, for example. Using only 200 mW link radios and high gain directional antennas, a very narrow beam may be used to construct reliable links with minimal radio frequency interference to other users.
History
Wi-Fi uses both single carrier direct-sequence spread spectrum radio technology (part of the larger family of spread spectrum systems) and multi-carrier OFDM (Orthogonal Frequency Division Multiplexing) radio technology. These regulations then enabled the development of Wi-Fi, its onetime competitor HomeRF, and Bluetooth.
Unlicensed spread spectrum was first made available in the US by the Federal Communications Commission in 1985 and these FCC regulations were later copied with some changes in many other countries enabling use of this technology in all major countries.[14] The FCC action was proposed by Michael Marcus of the FCC staff in 1980 and the subsequent regulatory action took 5 more years. It was part of a broader proposal to allow civil use of spread spectrum technology and was opposed at the time by main stream equipment manufacturers and many radio system operators.
The precursor to Wi-Fi was invented in 1991 by NCR Corporation/AT&T (later Lucent & Agere Systems) in Nieuwegein, the Netherlands. It was initially intended for cashier systems; the first wireless products were brought on the market under the name WaveLAN with speeds of 1 Mbit/s to 2 Mbit/s. Vic Hayes, who held the chair of IEEE 802.11 for 10 years and has been named the 'father of Wi-Fi,' was involved in designing standards such as IEEE 802.11b, and 802.11a.
City wide Wi-Fi
Further information: Municipal wireless network
St. Cloud, Florida became the first city in the United States to offer city wide free Wi-Fi,[15] although many others have plans to offer the service. Corpus Christi, Texas had offered free Wi-Fi until May 31, 2007 when the network was purchased by Earthlink.[16] Philadelphia is also using Earthlink for its city wide Wi-Fi.[17] New Orleans had free city wide Wi-Fi shortly after Hurricane Katrina.[18] City wide Wi-Fi is available in nine cities in the UK, including Leeds, Manchester, Norwich and London.[19] Other cities, such as the Minneapolis metro area, have a large number of Wi-Fi hotspots so you can receive good signals anywhere, even if from different sources. In Europe, the City of Luxembourg has a city-wide Wi-Fi network.
In Latin America, Mexico City downtown has a public Wi-Fi network.
Origin and meaning of the term "Wi-Fi"
Despite the similarity between the terms "Wi-Fi" and "Hi-Fi", statements reportedly made by Phil Belanger of the Wi-Fi Alliance contradict the conclusion that "Wi-Fi" stands for "Wireless Fidelity".[20][21][22] According to Belanger, the Interbrand Corporation developed the brand "Wi-Fi" for the Wi-Fi Alliance to use to describe WLAN products that are based on the IEEE 802.11 standards. In Belanger's words,
Wi-Fi and the yin yang style logo were invented by Interbrand. We [the founding members of the Wireless Ethernet Compatibility Alliance, now called as the Wi-Fi Alliance] hired Interbrand to come up with the name and logo that we could use for our interoperability seal and marketing efforts. We needed something that was a little catchier than 'IEEE 802.11b Direct Sequence'.[23]
The Wi-Fi Alliance themselves invoked the term "Wireless Fidelity" with the marketing of a tag line "The Standard for Wireless Fidelity," but later removed the tag from their marketing. The Wi-Fi Alliance now seems to discourage the propagation of the notion that "Wi-Fi" stands for "Wireless Fidelity", but it has been referred to as such by the Wi-Fi Alliance in White Papers currently held in their knowledge base: "… a promising market for wireless fidelity (Wi-Fi) network equipment."[24] and "A Short History of WLANs." The association created the Wi-Fi logo to indicate that a product had been certified for interoperability.[25]
See Also:
Hotspot
Wireless access point
DTIM (Delivery Traffic Indication Message)
Long-range Wi-Fi
Switched mesh
Public Safety Network
Wireless security
Evil twin phishing
Comparison of wifi handhelds
Nintendo Wi-Fi Connection
Wi-Fi router
iwconfig
Wireless tools for Linux
From Wikipedia, the free encyclopedia
Rudy H - Online Zuperstore
